62
זכר
נשוי
****
מלאה
מידי
תואר שני
עברית
אנגלית
רכב פרטי – רישיון ב'
רכב פרטי
1986 – 1990 BSc in Electrical Engineering Ben-Gurion University, Beer
Sheva, Israel.
Major/Minor Specialisation: Electro optics circuits,
Negative Differential Resistance (NDR) circuits.
2008 – 2010 MSc in Physics, Ben-Gurion University, Beer Sheva, Israel
Major Specialisation: Elements of Gradostat Chemostat
Two Compartment Theory: Dynamic and Nonlinearity
Application in Biology.
שירות צבאי
שירות צבאי מלא
ניסיון תעסוקתי
2021 - 2024 System and Laboratory engineer, Wiezmann Institute of Science Israel
• Testing and analyses of NMR probes by using vnmr software which control NMR spectrometers, vnmr parameters definitions and values.
• Design and verification of DCM (Double Center Magnet) Sample/Tissue gas heating (Melting) system by using high temperature Nitrogen gas (~ 350 C degree).
• Gathering the knowledge and experience necessary to ensure the right experimental testing needed for MRI/NMR/EPR magnet systems.
• Actively participating in technological meeting activities and providing technical support for MRI/NMR/EPR system experiemnts.
• System design testing and verification of Electron Para magnetic Resonance (EPR) or Electron Spin Resonance (ESR) magnet systems. EPR material spectroscopy, spectral parameters and analysis.
• Design building and testing of NMR/EPR/ENDOR probs’s RF coils/antennas by using Lab equipement (VNA, Spectrum analyzer, Network analyzer, Power meter, and RF Microwave generators).
• NMR/EPR DNP (Dynamic Nuclear Polarization) systemS design and experiments.
• Design and testing NMR (up to 1GHz) and EPR (up to 1GHz, W – Band domain ( 75 – 110GHz)) Tx/Rx systems paths by using microwave Amplifiers, LNAs, filters, switches, circulators, attenuators, terminations, power dividers, couplers, detectors, modulators, wavequides, Duplexers, Diplexers, bias tees, PIN detectors, etc. , and by other transmission line components.
• Experimental and Testing by using Varian NMR probes, Double/Triple NMR probes, MAS (Magic Angle Spinning) NMR probes, DNP/NMR probes, Solid state NMR probes, Gas flow MAS NMR probes, Liquids NMR probes, and probes with Variable Temperature (VT) gas flow control. Magic angle spinning (MAS) NMR spectroscopy.
2019 - 2020 Testing and QA engineer, Magen Laboratory Israel
• Testing and QA engineer for components Authentication and protection from counterfeit electronics components. Semiconductors devices Die testing by using optical microscope.
• Develop test-benches from block level to ICs devices and semiconductor. Run functional verification tests, debug failures and analyze functional coverage, Die inspection and analysis.
• Testing Semiconductors ICs, Optical components, RF/Microwave ICs and connectors in the Lab, external visual inspection (under microscope), Heated Solvent Test (Destructive test), Decapsulation Test (Destructive test), X-Ray inspection (Non-destructive test), XRF Test (Non Destructive test), Fourier-transform infrared spectroscopy (FTIR) inspection technique is used to obtain an infrared spectrum of absorption or emission of a Semiconductor devices and to get there internal materials (An FTIR spectrometer simultaneously collects high-spectral-resolution data over a wide spectral range), Scanning Electron Microscopy (SEM) and Electrical test (Non Destructive test).
• Gathering the knowledge and experience necessary to ensure the right testing needed for semiconductors and ICs.
• Actively participating in technological meeting activities and providing technical support for various testing procedures.
• Develop and implements innovative and a new testing methods in varies areas (Semiconductors ICs, Optical components, RF and Microwave, Power and power management ICs, etc.).
• Use Lab testing equipment, LCR, Curve tracer, Scope, DVM, RF and Microwave lab testing Instruments by Keysight (Spectrum analyzer, Waveform generator, Network analyzer, etc.).
Laboratory and RF/Microwave engineer, Ruppin Academic Center Israel
• Managing and support for seven advance engineering Laboratories (RF/Microwave, Lasers and electroptics, Medical, Material, Physics and Microelectronics).
• Develop and implements innovative and a new experiments in varies areas (RF and Microwave, Lasers and Electroptics, etc,).
• Simulation and analysis of RF and Microwave systems and devices by using ADS
2016 - 2017 System & Integration engineer, ELI-NP Bucharest-Magurele Romania
• System and integration engineer, specialize in High Power Laser System (HPLS) and RF/Microwave systems. Design, technical support, verification, testing, simulation and analysis.
• Preparing the Technical Design Reports (TDRs) for the experiments and auxiliary labaroties. Design, analysis, simulation and verification of high power laser system at optimal parameters.
• Providing technical support for Laser and RF systems in correlation with the top and leading technologies. Power electronics, analog and digital electronics, control system design and operation.
• Gathering the knowledge and experience necessary to ensure the operation of the high power laser infrastructure and of the related equipements. Assembling, testing, verification and commissioning of the high power laser equipment.
• Actively participating in technological development activities and providing technical support for experiements. Participating in maintaining the performance of the high power laser system equipement to design level.
• Develop and implements data acquisition and control systems for High Power Laser experiemnts. Develops and implements solutions for EMP protection of instrumentation, Electronics: Front-end analog design (modeling, simulation, measurement techniques), PCB design for high-speed circuits.
• Develops remote instrument control, Responsible for firmware design and interfacing for instrumentation.
• Evaluation the technical offers from various electronic components and monitoring the fulfilment to related contracts.
• Providing technical assistance and participating in the installation and commissioning of the various electronic equipment and their further use.
• Supervising the operation of the electronic equipment after commissioning and developing the instrumentation for desining data acquisition systems and data filtering.
• Designing, simulating, prototyping and testing, mass production of electronic boards and maintaining magnet supply and control sources.
• Designing control systems for stepper motors, position and temperature sensors, vibration sensors, Laser sensors and RF/Microwave detectors.
• Actively and efficienthy involving in dialogue and communication within R&D team and promoting a harmonious collaboration framework.
2014 - 2015 System & Integration engineer, RS Traffic (Orad) Company Israel
• System and integration engineering for Siemens road solutions (Infrastructure and Urban traffic control, Parking space management, toll systems, road services, eBus/eBRT). Siemens control and traffic management systems, control network, communication and control solutions for various applications.
• Integration and system engineering for Siqura/Optelecom products. Video codecs, Video Over Fiber (VOF), networking solutions, Drop/Insert data modem optical budget. Port managed Fast Ethernet switch and digital video transmitters and receivers.
• Programming and configuration of traffic elements: Cameras (IP/Analog, CCTV (PTZ), TVD), VPS (Variable Prizmatic Sign) – Triplesign, LCS (Lane Control Sign) – AESYS, VMS (Variable Message Sign) – AESYS, SCADA system integration.
• Supervision control and Data acquisition, CWAN/LWAN networking, HMI interface, RS/422/RS485/MODBUS interfaces, I/O monitoring and PLC redundancy systems.
• Cisco catalyst switches, Routers, Networking solutions, Fiber optic data transmitters and receivers MM (Multi Mode) & SM (Single Mode). Service modules tolling system optical switches and optical ring solutions. MOXA media converter products design and model.
• Crouzet automation and controller systems. Protocols: SAP (Session Announcement Protocol), RTSP (Real Time Streaming Protocol), NVR (Networking Video Recording).
• Traffic and automation routing network using Multi Protocol Label Switching (MPLS). Routers Label Switching Path (LSP), hop by hop system router configuration and optimization.
• VOIP subsystems design and networking for traffic control systems, integration and system engineering
2012 - 2013 Testing and QA engineer, NXP Company China, donggong
• RF testing engineer in NXP Company. Parset/uParset semiconductor testers.
• Configurations, RF Amplifiers, LNAs, RF discrete, testing in the LAB (ENA/PNA), run test scripts to various device packages.
• Devices test program development, DOE, SPC, FMEA, Mini Tab and Problem Solving, tools, analyze the field failure return from the customer which related to the product characteristic and provide technical solutions to address the field failure.
• Additional the position includes optimizing wafers sort limit and test value limits related to the RF characteristic of the products and also update technical data sheets to business marketing.
• Manage NPI and new test program development for RF products.
2009 - 2012 Field application engineer, Avnet Company Israel
• Analog/Power/OPTO Field Application Engineer and TSM (Technical Sales Manager.
• DC-DC converters (Isolated/Non-isolated) and analog Power circuits, design review, MCUs/CPUs, RF systems, RFID/NFC, RFICs.
• Power/Analog circuits Simulation, Amplifiers & Comparators, and data converters. Voltage references, clock and timing, interfaces.
• Application Engineer for the following areas: Analog parts and solutions, DDR/PCIE/SA, Optical ICs, and High power LEDs.
• Power applications and solutions, wireless parts and engineering solutions for Power/Analog embedded systems.
• MEMS solutions and applications. Creative in adapt MEMS engineering circuit/IC to cutomer applications and specialy experience in MEMS Microphone technical support.
2002 - 2009 Field application engineer, Future electronic Company Israel
• Analog/RF/OPTO Field Application Engineer and TSM (Technical Sales Manager), various applications and solutions.
• Microwave & Power Amplifiers (PAs) design review, RF Circuits and RF Simulation, RFICs, Antennas, RF systems chain analysis. LNAs, Mixers, LDMOS, DMOS, RF spliters and combiners, Up and Down converters, Low and High power RF applications.
• Application Engineer for the following areas: Analog parts and solutions, Power applications and solutions, Optical modules.
• Wireless parts and engineering solutions for RF embedded systems.
• Power applications and solutions, wireless parts and engineering solutions for Power/Analog embedded systems.
• MEMS solutions and applications. Creative in adapt MEMS engineering circuit/IC to cutomer applications and specialy experience in MEMS Microphone technical support.
2000 - 2002 Application engineer & Chip design, National semiconductors Company Israel
• IAOC (Information Appliance on a Chip) Application Engineer for STB (Set Top Box), Thin Client and Web PAD systems.
• The position included schematic review, technical support for IAOC systems, writing application notes and PowerPoint presentations for different collateral subjects. Thin Client and Web PAD systems.
• In addition, I was TME (Technical Marketing Engineer) for IAOC Products. I met with customers, wrote and updated Datasheets and introduced the material to customers.
• I also provided technical support for Advanced PC components and wrote reference design schematics for customers (Dell, HP, Compaq, etc).
1999 - 2000 Field application engineer, Arrow-Rapac Company Israel
• Technical Support and Application Manager for marketing semiconductor components.
• Micro controllers, USB Protocol, GSM, networks, WAN and LAN, I^2C and CAN (Control Area Networks) products for the automotive industry.
• I worked as a Technical Support and Application Manager for marketing semiconductor components, Micro controllers, USB Protocol, GSM, networks, WAN and LAN, I^2C and CAN (Control Area Networks) products, for the Automotive industry.
• I worked with switches and routers, video, products, wireless communication, multimedia, RF Transistors, logic components, PLLs &synthesizers, Camera USB products, Bluetooth, FireWire (IEEE1394), smart cards, Tremedia components, optical network components (SDH, SONET) and circulator/Isolators.
• The position included application and technical support for Hi Tech companies in those areas, preparing and presenting PowerPoint presentations for customers, writing technical documents for the Hi Tech Industry, and providing advice on which components to use for design applications.
1998 - 1999 System engineer, CML company San Diego, USA
• System Engineer on video systems, SG workstations, UNIX (IRIX, which is the OS for SG (Silicon Graphics) servers), and WN NT.
• Communication networks, (TCP/IP, LAN, WAN, the ETHERNET), with the various hardware that connected through HUB and applications for the cable industry, and ISDN communication with hardware components on the remote site.
• I worked as a System Engineer on video systems, SG workstations, UNIX (IRIX, which is the OS for SG (Silicon Graphics) servers), and WN NT.
• I worked with communication networks, (TCP/IP, LAN, WAN, the ETHERNET), with the various hardware that connected through HUB and applications for the cable industry, and ISDN communication with hardware components at the remote site.
• Technical integration to the Broadcast Automation System included different functional units such as main Server (Compaq) with redundancy units and RAID storage units (the main software resided on the server), SG server (the second server in the system) to store all the video clips in the system (communication to that unit was by Ethernet level and from that unit to the decoders (VELA) by SCSI (Small Computer System Interface) parallel bus, Encoder Unit (Optic Vision) to compress all the video clips in MPEG2 format, Decoder units (VELA) to decompress all the clips coming from the SG server and transmit them to the cable subscribers. VOIP and networking protocols.
• In addition, I took care of the hardware side of the system as well as the software side (i.e., the main automation software in the Compaq Main Server), integrating both to complete the system.
Key competencies
• Technical support customers, leader of system projects (Analog, RF, Optics), marketing and sales, system engineering, engineering, testing, QA engineering, writing software for embedded systems and technical training. Microwave and antenna system optimization and design expertise, STD, STP, SQL. Optoisolation circuits design and simulation for various applications.
• Working with customers, technical presentations, face to face and telephone communications, customer's technical problems analysis and solutions, WLAN/Bluetooth, fiber optics, VOIP and networking.
• Working with overseas customers, design and testing of circuits, analysis and simulation of circuit and embedded systems.
• Service attitude, initiative, creative thinking outside the box, and high ability in self-learning, focus on targets.
• Creative and simple solutions to sophisticated tasks.
• Published many technical and academic articles and books.
• Additional knowledge in nonlinear physics, optical systems, identification systems (RFID/NFC), systems analysis, advanced optimisation methods, microcontrollers, training and building of training material. RFICs design, support and optimisation expert.
• Good knowledge in MEMS solutions and applications. Creative in adapt MEMS engineering circuit/IC to cutomer applications and specialy experience in MEMS Microphone technical support.
• Configuration and optimization of Multi Protocol Label Switching (MPLS) networks and Label Switching Path (LSP) configuration.
• Signal processing analysis by using nonlinear dynamic, implementation by using hardware and software. ASIC, Priority.
• Experience in Analog IP layout design, analog and digital converters (DAC/ADC), Cadence virtuoso layout editor and Mentor Calibre verification tools design, semiconductors Silicon TSMC. Timing, sta, FE, Design.
• Optimization, design and analysis experience – Microwave/RF antennas and circuits, RFID, simulation, debugging and testing.
• High Power Laser System (HPLS), design, support, testing, analysis.
http://scholar.google.com.au/citations?sortby=pubdate&hl=en&user=nxWLLoQAAAAJ
